Simulation of the Effect of Temperature on the Viscosity of Some Selected Engine Oils

Kehinde Abdulsemiu Busari; Alhaji Abubakar; Taiwo Abduljelil Busari; Suleiman Modu Ngaram; Adam Tijjani Jakada; Musbaudeen Alaba Afolabi; Abdulhamid Mohammed Ribadu; Hassan Adamu

doi:doi:10.11648/j.ajpa.20221004.11

Simulation of the Effect of Temperature on the Viscosity of Some Selected Engine Oils

Kehinde Abdulsemiu Busari, Alhaji Abubakar, Taiwo Abduljelil Busari, Suleiman Modu Ngaram, Adam Tijjani Jakada, Musbaudeen Alaba Afolabi, Abdulhamid Mohammed Ribadu, Hassan Adamu

Published in American Journal of Physics and Applications (Volume 10, Issue 4)

Received: 24 June 2022 Accepted: 20 July 2022 Published: 21 October 2022

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Viscosity is the resistance of a fluid to flow due to internal friction on the layers of the fluid. An example of such fluid is engine oil which happens to be viscous and thus serves as a lubricant for the moving parts of automobile engines to work efficiently. However, this lubrication is only possible because automobile engines generate heat that reduces viscosity and allows the smooth flow of oil through engine parts. So, we conducted an experiment to determine the effect of temperature on the viscosity of engine oil A, B, C, D and E. Thereafter, we used MATLAB programming to analyze and optimize the viscosity of these fluids. Results show that at the temperature range of (35 – 95)°C, the viscosity of SAE20W-50W (A, B, C, D and E) engine oil is maximum at (0.5079, 0.4848, 0.4971, 0.4980, and 0.4846) kg/ms respectively and minimum at (0.2793, 0.2934, 0.2804, 0.2682 and 0.2806) kg/ms respectively. Therefore, increase in temperature decreases the viscosity and cooling rate of engine oils to provide a favorable lubrication. Conclusively, we established that engine oils B, C and E are more preferable for automobile users in both industries and households.

Published in	American Journal of Physics and Applications (Volume 10, Issue 4)
DOI	10.11648/j.ajpa.20221004.11
Page(s)	57-61
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Viscosity, Simulation, Temperature, Engine Oil

References

[1]	Alhaifi, K., Abed, A. I., & Nawaf, A. (2017). Optimization of Different Grades Engine Oil Viscosity. American Journal of Engineering Research, 6 (5), pg 269.
[2]	Alholli, Y., Alshammri, A. G., Abed, A. I., & Alali, S. A. (2015). Mathematical Modeling of Engine New and Used Oils. International journal of Research in Advanced Engineering and Technology, 1 (1).
[3]	Gibbs, K. (2011). Advanced Physics. Cambridge University Press.
[4]	Ike, E. (2019). The study of viscosity-temperature dependence and activation energy for palm oil and soybean oil. Global journal of pure and applied sciences vol. 25, 2019: 209-217.
[5]	James B. wills, J. (2015). Fact About Engine Oil. Agricultural Extension Service.
[6]	Kumar, N. (2008). Comprehensive Physics. New Delhi: Laxmi Publication (P) LTD (Vol. 1).
[7]	Manoj, B. (2015). Analysis of kinematic viscosity for liquids by varying temperature. Journal of initiative research in science, engineering and technology.
[8]	Nelkon, M., & Parker, P. Advanced Level Physics. CBS Publisher and Distributor PVT LTD.
[9]	Shaun, T. (2016). Venus Dictionary of Physics. New Delhi, India: Venus Book New Delhi (India).
[10]	Thameem Basha, H., Sivaraj, R., Subramanyam, Reddy A•, Ali, Chamkha J., & Tilioua, M. (2020). Impacts of temperature‑dependent viscosity and variable Prandtl number on forced convective Falkner–Skan flow of Williamson nanofluid. Springer Nature Applied Sciences journal, 2: 477 \| https://doi.org/10.1007/s42452-020-2216-3.
[11]	Thilakavathi, R., & Suresh, K. (2022). Influence of viscosity on the thermal behavior of fluids in a sealed can. Alexandria Egineering Journal, www.elsevier.com/locate/aej www.sciencedirect.com https://doi.org/10.1016/j.aej.2022.01.038, 61, pg 7833-7842.
[12]	Voltech, K., Jiri, C., & Polcar, A. (2012). Reological Profiles Of Blends of the New and Used Motor Oils. Acta Universitatis Agriculturae Et Silviculturae Mendelianae Brunensis.
[13]	Wang, C., Liu, S., Wu, J., & Li, Z. (2014). effects of temperature-dependent viscosity on fluid flow and heat transfer in a helical rectangular duct with a finite pitch. Brazilian Journal of Chemical Engineering, 31 (3), pg 787.

Cite This Article

Plain Text BibTeX RIS

APA Style

Kehinde Abdulsemiu Busari, Alhaji Abubakar, Taiwo Abduljelil Busari, Suleiman Modu Ngaram, Adam Tijjani Jakada, et al. (2022). Simulation of the Effect of Temperature on the Viscosity of Some Selected Engine Oils. American Journal of Physics and Applications, 10(4), 57-61. https://doi.org/10.11648/j.ajpa.20221004.11

Copy | Download

ACS Style

Kehinde Abdulsemiu Busari; Alhaji Abubakar; Taiwo Abduljelil Busari; Suleiman Modu Ngaram; Adam Tijjani Jakada, et al. Simulation of the Effect of Temperature on the Viscosity of Some Selected Engine Oils. Am. J. Phys. Appl. 2022, 10(4), 57-61. doi: 10.11648/j.ajpa.20221004.11

Copy | Download

AMA Style

Kehinde Abdulsemiu Busari, Alhaji Abubakar, Taiwo Abduljelil Busari, Suleiman Modu Ngaram, Adam Tijjani Jakada, et al. Simulation of the Effect of Temperature on the Viscosity of Some Selected Engine Oils. Am J Phys Appl. 2022;10(4):57-61. doi: 10.11648/j.ajpa.20221004.11

Copy | Download

@article{10.11648/j.ajpa.20221004.11,
  author = {Kehinde Abdulsemiu Busari and Alhaji Abubakar and Taiwo Abduljelil Busari and Suleiman Modu Ngaram and Adam Tijjani Jakada and Musbaudeen Alaba Afolabi and Abdulhamid Mohammed Ribadu and Hassan Adamu},
  title = {Simulation of the Effect of Temperature on the Viscosity of Some Selected Engine Oils},
  journal = {American Journal of Physics and Applications},
  volume = {10},
  number = {4},
  pages = {57-61},
  doi = {10.11648/j.ajpa.20221004.11},
  url = {https://doi.org/10.11648/j.ajpa.20221004.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpa.20221004.11},
  abstract = {Viscosity is the resistance of a fluid to flow due to internal friction on the layers of the fluid. An example of such fluid is engine oil which happens to be viscous and thus serves as a lubricant for the moving parts of automobile engines to work efficiently. However, this lubrication is only possible because automobile engines generate heat that reduces viscosity and allows the smooth flow of oil through engine parts. So, we conducted an experiment to determine the effect of temperature on the viscosity of engine oil A, B, C, D and E. Thereafter, we used MATLAB programming to analyze and optimize the viscosity of these fluids. Results show that at the temperature range of (35 – 95)°C, the viscosity of SAE20W-50W (A, B, C, D and E) engine oil is maximum at (0.5079, 0.4848, 0.4971, 0.4980, and 0.4846) kg/ms respectively and minimum at (0.2793, 0.2934, 0.2804, 0.2682 and 0.2806) kg/ms respectively. Therefore, increase in temperature decreases the viscosity and cooling rate of engine oils to provide a favorable lubrication. Conclusively, we established that engine oils B, C and E are more preferable for automobile users in both industries and households.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Simulation of the Effect of Temperature on the Viscosity of Some Selected Engine Oils
AU  - Kehinde Abdulsemiu Busari
AU  - Alhaji Abubakar
AU  - Taiwo Abduljelil Busari
AU  - Suleiman Modu Ngaram
AU  - Adam Tijjani Jakada
AU  - Musbaudeen Alaba Afolabi
AU  - Abdulhamid Mohammed Ribadu
AU  - Hassan Adamu
Y1  - 2022/10/21
PY  - 2022
N1  - https://doi.org/10.11648/j.ajpa.20221004.11
DO  - 10.11648/j.ajpa.20221004.11
T2  - American Journal of Physics and Applications
JF  - American Journal of Physics and Applications
JO  - American Journal of Physics and Applications
SP  - 57
EP  - 61
PB  - Science Publishing Group
SN  - 2330-4308
UR  - https://doi.org/10.11648/j.ajpa.20221004.11
AB  - Viscosity is the resistance of a fluid to flow due to internal friction on the layers of the fluid. An example of such fluid is engine oil which happens to be viscous and thus serves as a lubricant for the moving parts of automobile engines to work efficiently. However, this lubrication is only possible because automobile engines generate heat that reduces viscosity and allows the smooth flow of oil through engine parts. So, we conducted an experiment to determine the effect of temperature on the viscosity of engine oil A, B, C, D and E. Thereafter, we used MATLAB programming to analyze and optimize the viscosity of these fluids. Results show that at the temperature range of (35 – 95)°C, the viscosity of SAE20W-50W (A, B, C, D and E) engine oil is maximum at (0.5079, 0.4848, 0.4971, 0.4980, and 0.4846) kg/ms respectively and minimum at (0.2793, 0.2934, 0.2804, 0.2682 and 0.2806) kg/ms respectively. Therefore, increase in temperature decreases the viscosity and cooling rate of engine oils to provide a favorable lubrication. Conclusively, we established that engine oils B, C and E are more preferable for automobile users in both industries and households.
VL  - 10
IS  - 4
ER  -

Copy | Download

Author Information

Kehinde Abdulsemiu Busari

Faculty of Science, Federal University Gashua, Gashua, Nigeria
Alhaji Abubakar

Faculty of Science, Federal University Gashua, Gashua, Nigeria
Taiwo Abduljelil Busari

Department of Physics, Nigerian Tulip International College, Yankaba, Nigeria
Suleiman Modu Ngaram

Faculty of Science, Federal University Gashua, Gashua, Nigeria
Adam Tijjani Jakada

Faculty of Science, Federal University Gashua, Gashua, Nigeria
Musbaudeen Alaba Afolabi

Department of Physics, Nigeria Maritime University, Okerenkoko, Delta, Nigeria
Abdulhamid Mohammed Ribadu

Department of Physics, Reality Model School, Nguru, Nigeria
Hassan Adamu

Faculty of Science, Federal University Gashua, Gashua, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Kehinde Abdulsemiu Busari, Alhaji Abubakar, Taiwo Abduljelil Busari, Suleiman Modu Ngaram, Adam Tijjani Jakada, et al. (2022). Simulation of the Effect of Temperature on the Viscosity of Some Selected Engine Oils. American Journal of Physics and Applications, 10(4), 57-61. https://doi.org/10.11648/j.ajpa.20221004.11

Copy | Download

ACS Style

Kehinde Abdulsemiu Busari; Alhaji Abubakar; Taiwo Abduljelil Busari; Suleiman Modu Ngaram; Adam Tijjani Jakada, et al. Simulation of the Effect of Temperature on the Viscosity of Some Selected Engine Oils. Am. J. Phys. Appl. 2022, 10(4), 57-61. doi: 10.11648/j.ajpa.20221004.11

Copy | Download

AMA Style

Kehinde Abdulsemiu Busari, Alhaji Abubakar, Taiwo Abduljelil Busari, Suleiman Modu Ngaram, Adam Tijjani Jakada, et al. Simulation of the Effect of Temperature on the Viscosity of Some Selected Engine Oils. Am J Phys Appl. 2022;10(4):57-61. doi: 10.11648/j.ajpa.20221004.11

Copy | Download

@article{10.11648/j.ajpa.20221004.11,
  author = {Kehinde Abdulsemiu Busari and Alhaji Abubakar and Taiwo Abduljelil Busari and Suleiman Modu Ngaram and Adam Tijjani Jakada and Musbaudeen Alaba Afolabi and Abdulhamid Mohammed Ribadu and Hassan Adamu},
  title = {Simulation of the Effect of Temperature on the Viscosity of Some Selected Engine Oils},
  journal = {American Journal of Physics and Applications},
  volume = {10},
  number = {4},
  pages = {57-61},
  doi = {10.11648/j.ajpa.20221004.11},
  url = {https://doi.org/10.11648/j.ajpa.20221004.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpa.20221004.11},
  abstract = {Viscosity is the resistance of a fluid to flow due to internal friction on the layers of the fluid. An example of such fluid is engine oil which happens to be viscous and thus serves as a lubricant for the moving parts of automobile engines to work efficiently. However, this lubrication is only possible because automobile engines generate heat that reduces viscosity and allows the smooth flow of oil through engine parts. So, we conducted an experiment to determine the effect of temperature on the viscosity of engine oil A, B, C, D and E. Thereafter, we used MATLAB programming to analyze and optimize the viscosity of these fluids. Results show that at the temperature range of (35 – 95)°C, the viscosity of SAE20W-50W (A, B, C, D and E) engine oil is maximum at (0.5079, 0.4848, 0.4971, 0.4980, and 0.4846) kg/ms respectively and minimum at (0.2793, 0.2934, 0.2804, 0.2682 and 0.2806) kg/ms respectively. Therefore, increase in temperature decreases the viscosity and cooling rate of engine oils to provide a favorable lubrication. Conclusively, we established that engine oils B, C and E are more preferable for automobile users in both industries and households.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Simulation of the Effect of Temperature on the Viscosity of Some Selected Engine Oils
AU  - Kehinde Abdulsemiu Busari
AU  - Alhaji Abubakar
AU  - Taiwo Abduljelil Busari
AU  - Suleiman Modu Ngaram
AU  - Adam Tijjani Jakada
AU  - Musbaudeen Alaba Afolabi
AU  - Abdulhamid Mohammed Ribadu
AU  - Hassan Adamu
Y1  - 2022/10/21
PY  - 2022
N1  - https://doi.org/10.11648/j.ajpa.20221004.11
DO  - 10.11648/j.ajpa.20221004.11
T2  - American Journal of Physics and Applications
JF  - American Journal of Physics and Applications
JO  - American Journal of Physics and Applications
SP  - 57
EP  - 61
PB  - Science Publishing Group
SN  - 2330-4308
UR  - https://doi.org/10.11648/j.ajpa.20221004.11
AB  - Viscosity is the resistance of a fluid to flow due to internal friction on the layers of the fluid. An example of such fluid is engine oil which happens to be viscous and thus serves as a lubricant for the moving parts of automobile engines to work efficiently. However, this lubrication is only possible because automobile engines generate heat that reduces viscosity and allows the smooth flow of oil through engine parts. So, we conducted an experiment to determine the effect of temperature on the viscosity of engine oil A, B, C, D and E. Thereafter, we used MATLAB programming to analyze and optimize the viscosity of these fluids. Results show that at the temperature range of (35 – 95)°C, the viscosity of SAE20W-50W (A, B, C, D and E) engine oil is maximum at (0.5079, 0.4848, 0.4971, 0.4980, and 0.4846) kg/ms respectively and minimum at (0.2793, 0.2934, 0.2804, 0.2682 and 0.2806) kg/ms respectively. Therefore, increase in temperature decreases the viscosity and cooling rate of engine oils to provide a favorable lubrication. Conclusively, we established that engine oils B, C and E are more preferable for automobile users in both industries and households.
VL  - 10
IS  - 4
ER  -

Copy | Download